Actelis - Precision Traffic and Safety Systems

Actelis Networks

Actelis Networks is recognized as the #1 global supplier of Ethernet over bonded-copper solutions. Spanning 40 countries, Actelis’ market leadership is attributed to our best-in-class products, which are widely deployed by more than 200 customers, including telecom service providers, enterprises and municipalities. Field-proven, time-tested and environmentally hardened, Actelis products deliver up to 100 Mbps of symmetrical Ethernet service per customer over existing copper infrastructure. Actelis’ strength and market leadership is due to our ability to achieve unprecedented Rate, Reach and Reliability, or what we refer to as The 3 R’s of EFM™, on any grade of available copper.

Actelis 600 Series
The ML620 Ethernet Access Devices (EADs) from Actelis Networks® enable delivery of high-speed carrier Ethernet services over the existing copper and fiber infrastructure. The ML620s are intelligent, compact EADs that deliver up to 100 Mbps of symmetrical Ethernet traffic with fiber quality over existing copper pairs.

Available in either 2, 4 or 8 copper pairs with optional SFP fiber configurations*, the ML620 EAD can be deployed in a Point-to-Point configuration, optional copper Add-Drop chain, or as the CPE in a Point-to-Multi-Point configuration with Actelis’ EFM switches.

  • IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution
  • MEF Certified Ethernet Capabilities
  • Rapid Service Deployment
  • Superior Rate, Reach & Reliability
  • Low Delay and Jitter for Voice and Video Transmission
  • Worldwide Spectral Compliancy
  • OSMINE, NEBS III, FCC, UL, CE
  • Environmentally Hardened
  • Actelis ML 630
    The ML630 Ethernet Access Devices (EADs) from Actelis Networks® enable delivery of high-speed carrier Ethernet services over existing copper and fiber infrastructure. The ML630s are intelligent, compact EADs that deliver up to 100 Mbps of symmetrical Ethernet traffic with fiber quality over existing copper pairs.

    The ML630 supports 8 copper pairs with optional SFP fiber configurations. The ML630 EAD can be deployed in a Point-to-Point configuration, optional copper Add-Drop chain, or as the CPE in a Point-to-Multi-Point configuration with Actelis’ EFM switches.

    Actelis ML 640
    The ML640 Ethernet Access Device (EAD) from Actelis Networks® is the most intelligent Ethernet service delivery on the market. Using the existing copper network, the ML640 can deliver up to 100 Mbps of symmetrical Ethernet traffic at fiber quality over existing voice-grade copper. The ML640 comes in two models capable of supporting either 4 or 8 copper pairs, and has 2 optional SFP interfaces supporting 100/1000Base-FX optical connections.

    The ML640 EAD can be deployed back-to-back in a Point-to-Point topology or in Multi-Point topologies with Actelis’ Ethernet aggregation switches. With its superior performance, extensive functionality and low cost, the ML640 EAD offers rapid service delivery and allows for complete utilization of the existing network infrastructure.

    Download the Datasheet

    Actelis ML 698
    The Actelis Networks® ML698 expands our central office solutions, offering a compact and cost-effective Ethernet in the First Mile (EFM) mini-aggregation solution for low-pair count locations. The ML698 operates in a Point-to-Multipoint topology, connecting to up four ML600 Ethernet Access Devices (EADs) delivering symmetrical Ethernet access services to remote subscribers over multiple voice-grade copper pairs. Each of the ML600 EADs can be connected to the ML698 via a High Speed Link (HSL) comprised of 1-8 bonded copper pairs. Any combination of copper pairs per HSL can be supported to a total of 8 pairs per ML698 unit.

    The ML698 bonds up to 8 copper pairs together to create a 2Base-TL aggregated link, implementing the standard IEEE 802.3ah-2004 (EFM) long-reach Ethernet-over-Copper specification.

    Download the Datasheet

    Actelis ML 1300 Aggregation Switch
    The ML1300 is an Ethernet in the First Mile (EFM) aggregation switch, delivering symmetrical Ethernet services to remote subscribers over multiple voice-grade copper pairs within the customer service area. The ML1300 allows service providers and enterprises to use the existing copper infrastructure to deliver up to 100 Mbps of Ethernet service per customer. It achieves unprecedented rate, reach and reliability on any grade of available copper and installs within minutes, enabling immediate deployment of broadband services. The ML1300 is interoperable with any standard Ethernet switch or router. Aligned with Metro Ethernet Forum (MEF) recommendations, Actelis Networks® systems seamlessly integrate into carrier Ethernet networks.

    Download the Datasheet

  • IEEE 802.3ah Ethernet in the First Mile (EFM) 2Base-TL Solution
  • MEF Certified Ethernet Capabilities
  • Rapid Service Deployment
  • Superior Rate, Reach & Reliability
  • Low Delay and Jitter for Voice and Video Transmission
  • Worldwide Spectral Compliancy
  • OSMINE, NEBS III, FCC, UL, CE
  • Environmentally Hardened
  • Actelis ML 2300 Aggregation Switch
    Available with front and rear access for International and North American markets, respectively, the ML2300 is the next generation of Actelis Networks® Ethernet in the First Mile (EFM) aggregation switches, delivering symmetrical Ethernet access services to remote subscribers over multiple voice-grade copper pairs within the customer service area. Interoperable with any standard Ethernet switch or router and aligned with Metro Ethernet Forum (MEF) recommendations, the ML2300 allows service providers and enterprises to use existing copper infrastructure to deliver up to 100 Mbps Ethernet service per customer in G.SHDSL.bis technologies, and has the infrastructure ready for advanced Layer 1 and Layer 2 applications and features available in future releases. The ML2300 also achieves unprecedented rate, reach and reliability on any grade of available copper and installs within minutes, enabling immediate deployment of broadband services.

    Architecturally, the ML2300 platform serves as a central office aggregator in a Point-to-Multipoint topology, connecting to multiple ML600 Ethernet Access Devices (EADs). Each ML600 EAD or ML130 can be connected to the ML2300 via a High Speed Link (HSL) comprised of 1-8, or 1- 32, bonded copper pairs, respectively. A number of ML2300 shelves can be stacked in a star or ring topology, providing higher port density per uplink.

    Download the Datasheet

    Actelis ML 130 Aggregation Switch
    The Actelis ML130 is an Ethernet in the First Mile (EFM) aggregation platform that delivers symmetrical Ethernet services to remote subscribers over multiple voice-grade copper pairs within the customer service area. The ML130 allows service providers and enterprises to use the existing copper infrastructure to deliver up to 100 Mbps of Ethernet service per customer. The ML130 achieves unprecedented rate, reach and reliability on any grade of available copper and installs within minutes, enabling immediate deployment of broadband services. The ML130 is interoperable with any standard Ethernet switch or router. Aligned with Metro Ethernet Forum (MEF) recommendations, Actelis systems seamlessly integrate into carrier Ethernet networks.

    Architecturally, the ML130 platform serves as a central office aggregator in a Point-to-Multipoint topology connecting to multiple ML600 and ML50 Ethernet Access Devices (EADs). Each ML50/ML600 unit is connected to the ML130 via a High Speed Link (HSL) comprised of 1-8 bonded copper pairs. A number of ML130 systems can be stacked in a Star or Ring topology, providing flexible topology layouts and higher port density per uplink. Additionally, two ML130 systems can be connected together in a Point-to-Point topology, offering a HSL comprised of 1-32 bonded copper pairs. Moreover, the ML130 can be used in a Drop-and-Continue topology, splitting its 32 copper pairs in two directions to support a linear chain. Each node has full switching capabilities and can drop and add Ethernet traffic at each location while transferring the rest of the traffic through. For example, the ML130 may use some of its pairs to extend the reach of a CO to a remote location/terminal while using the remaining pairs to distribute the received CO Ethernet traffic over one or more HSLs to additional customers or further remote locations.

    Download the Datasheet